|
Won't stations get bogged down with all the small vehicles? |
 |
 |
 |
|
Written by Administrator
|
|
Saturday, 10 February 2007 05:23 |
|
Station throughput is determined by the number of station berths, which can be set to meet the demand of any particular station. In general, station throughput is high relative to conventional mass transit because:  | | Taxi 2000 station inside a building. | - Only vehicles that actually need to stop at a station will enter the station. All other vehicles pass by, thus reducing station traffic relative to conventional systems where all vehicles stop in each station regardless of where passengers are going.
- PRT stations are closely spaced, often within a quarter mile of each other. This is convenient to patrons, who walk only short distances, and results in smaller, less crowded stations.
- The loading time for each vehicle is relatively short, usually completed in a few seconds. As people become accustomed to PRT systems, they will enter and exit vehicles as quickly as cars, increasing station throughput and minimizing trip time.
|
FAQs 
You are welcome to add comments to the material published on our site. Your comments can be helpful in addressing the objectives of this site - namely to promote the awareness of PRT and the uptake of a commercial PRT implementation
We encourage robust, respectful and insightful debate but we will remove any overly abusive comments